Self-adhesive
Hot melt adhesive
Products:
[wpsm_comparison_table id=”33″ class=”hover-col1 center-table-align”]
Test Methods:
VISUAL physical appearance
Softening point (ring and ball) ASTM E 28
Brookfield viscosity at 150 ºC ASTM D 3236
Self-adhesive
Recommended applications:
Hot-melt to make self-adhesive gumming in the production of envelopes.
Conditions of application:
We recommend between 160 ºC and 180 ºC. The temperature depends on the speed of the machine, the ambient temperature and the amount of glue applied. Do not exceed 200 ºC.
Presenting:
Small pillows in cardboard boxes of 12 kg.
Large pillows in cardboard boxes of 14 kg.
Property:
Self-adhesive glue at room temperature. Very good behavior on the machine. Good resistance to aging by UV radiation.
Information about the components:
All the components used in the manufacture of this product meet the requirements of the American regulation F.D.A. (Food & Drug Administration) No 21 CFR 175.105 for adhesives in indirect contact with food. All the components used in the manufacture of this product meet the requirements of the American regulation F.D.A. (Food & Drug Administration) No 21 CFR 175.105 for adhesives in indirect contact with food.
Storage and Conservation:
Protect from sunlight, dust and excessive temperatures. Under normal storage conditions the product is perfectly preserved for 2 years.
IMPORTANT NOTE:
Since we can not foresee the applications under which our products can be used, we do not accept any responsibility for the results obtained by the application of this information or for the use of our products, either alone or in combination with other products.
Users are invited to conduct their own tests to determine the suitability or safety of each of these products for their own purposes. With the exception of the specifications approved above, we sell the products without warranty, the buyers and users assume full responsibility for the damages and losses resulting from the handling and use of our products, whether used alone or in combination with other products.
Information Diapers
Factory:
Pol. Ind. IP7 Casa Vicari Avda. Francia, 2
46890 Agullent - Valencia
Tfs 96 290 70 32 Fx 96 290 86 28
atencioncliente@guerola-sa.com
Administración:
Pº de la Castellana, 150 - 2º Dcha
28046 Madrid
Tfs 91 457 55 64 Fx 91 344 03 36
